Last October, Hurricane/Superstorm Sandy prevented most Halloween celebrations, and although I don't usually get too into the holiday, having a year off may have been just what I needed to get the spirit back. For my cards this year, I'm going all the way with glitter.
Using some regular Elmer's Glue and black glitter, these spiderweb cards are a synch to make. You can freehand a spiderweb design, or download and trace the template I've created from my sketch. Obviously you could glitter up anything, for any occasion, but hey, let's focus on the coming holiday.
Step 1:
Create a spiderweb design freehand, or download and trace the template I've created from my sketch. Remember to keep your pencil marks light.
Step 2:
Trace over the drawing with white glue. I used a toothpick to get in small areas or to clean up any slips (there will be some). Hold the bottle at an angle to prevent it coming out in globs and work in small sections so that glue doesn't dry before you can add the glitter. Superfine glitter will work best on these thin lines.
Step 3:
Sprinkle glitter over top. Let stand about 30 seconds, and then tap off excess. You can go back in with a toothpick and clean up any smudges. I like how non-uniform the lines are, it almost give the feel of water droplets on the web.
Optional: To keep glitter in place, cover the card with 1-2 coats of acrylic spray. I used Krylon Crystal Clear Acrylic. Make sure to spray in a well ventilated area. Right outside your front door with the door open so all the fumes go back in the house is not considered a well ventilated area (I'm telling myself this).
Have a spooky Halloween!
